[K3] Question re KAT500 Utility for the Mac

[Don Putnick-6]

I can't seem to select one group of bands for one antenna and a different
group of bands for another. All that seems to work for me is either one
band or all bands. Suggestions please.

Thanks and 73,
Don NA6Z
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Don,

There is no selection of a "group of bands" - but you can select the
proper antenna for any one band.  Once you have done that, change bands
and select the desired antenna for that band.  When you have covered all
bands of interest and selected the antennas for each, is the proper
antenna selected when you switch to that band?  If so, all should be well.

Did I misunderstand something in your question?

73,
Don W3FPR

On 10/17/2017 6:54 PM, Don Putnick wrote:
> I can't seem to select one group of bands for one antenna and a different
> group of bands for another. All that seems to work for me is either one
> band or all bands. Suggestions please.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Putnick-6]

Thanks, Don. No, you didn't misunderstand my question. I was trying to
select the antenna first, then select one or more bands second, which
doesn't work. Your way was to do it the other way around; select the band
first, then select one or more antennas second, which does work. All better.
Thanks again and 73!
Don NA6Z

On Tue, Oct 17, 2017 at 4:08 PM, Don Wilhelm <[hidden email]> wrote:

> Don,
>
> There is no selection of a "group of bands" - but you can select the
> proper antenna for any one band.  Once you have done that, change bands and
> select the desired antenna for that band.  When you have covered all bands
> of interest and selected the antennas for each, is the proper antenna
> selected when you switch to that band?  If so, all should be well.
>
> Did I misunderstand something in your question?
>
> 73,
> Don W3FPR
>
>
> On 10/17/2017 6:54 PM, Don Putnick wrote:
>
>> I can't seem to select one group of bands for one antenna and a different
>> group of bands for another. All that seems to work for me is either one
>> band or all bands. Suggestions please.
>>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Don,

I think there may have been a software utility in the past which allowed
you to do something like you were trying, but I may be thinking of the
KRC2 utility instead.

I am glad to hear that you are working OK now.

73,
Don W3FPR

On 10/19/2017 8:38 PM, Don Putnick wrote:

> Thanks, Don. No, you didn't misunderstand my question. I was trying to
> select the antenna first, then select one or more bands second, which
> doesn't work. Your way was to do it the other way around; select the
> band first, then select one or more antennas second, which does work.
> All better.
> Thanks again and 73!
> Don NA6Z
>
> On Tue, Oct 17, 2017 at 4:08 PM, Don Wilhelm <[hidden email]
> <mailto:[hidden email]>> wrote:
>
>     Don,
>
>     There is no selection of a "group of bands" - but you can select
>     the proper antenna for any one band.  Once you have done that,
>     change bands and select the desired antenna for that band.  When
>     you have covered all bands of interest and selected the antennas
>     for each, is the proper antenna selected when you switch to that
>     band?  If so, all should be well.
>
>     Did I misunderstand something in your question?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]