K3 & RIGblaster pro setup

[Tony McClenny]

If anyone is using this combination of hardware, please advise the interface
cable connections you are using.  Thanks.  I have been using the RIGblaster
pro with my Kenwood TS-570D (has worked very well) and now need to construct
a new interface cable for the RIGblaster pro to K3.  
 
- Tony -
 N3ME
 
Tony McClenny
118 Ashwood Street
Bethany Beach, DE 19930-9699
[phone]
 <http://www.n3me.net> www.n3me.net
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike B-12]

Hi, Tony.  If you're trying to use the RigBlaster for a "digital mode"
interface,  it's my understanding that it's not needed.  The K3 has a built-in
interface that eliminates the need for the Blaster.

> > If anyone is using this combination of hardware, please advise the interface
> > cable connections you are using.  Thanks.  I have been using the RIGblaster
> > pro with my Kenwood TS-570D (has worked very well) and now need to construct
> > a new interface cable for the RIGblaster pro to K3.

73,

Mike
KW1ND

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Mike K2MK]

Hi Tony:

Put your RIGblaster Pro on E-Bay and just connect your PC sound card
directly to the line in and line out ports on the K3 and adjust the levels
as needed. And you have probably already connected your PC to your K3 data
port in order to use the K3 Utility Program. It's all explained in the
manual.

73,
Mike K2MK

Tony McClenny
Mon, 09 Mar 2009 14:40:31 -0700

If anyone is using this combination of hardware, please advise the interface
cable connections you are using.  Thanks.  I have been using the RIGblaster
pro with my Kenwood TS-570D (has worked very well) and now need to construct
a new interface cable for the RIGblaster pro to K3.

- Tony -
 N3ME

Tony McClenny
118 Ashwood Street
Bethany Beach, DE 19930-9699
[phone]
 <http://www.n3me.net> www.n3me.net
 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Ed K3IXD]

Hi Tony,

I use the sound card for AFSK and wav files. All you need are direct
connect cables between the computer and K3.

I use N1MM for contesting, and KR1ST's AirLink Express for rag chewing
on RTTY and PSK. He supports the K3.

73, Ed
K3IXD
aka K3IXD/4 in some contests
Out of the circle PVRC member


Date: Mon, 9 Mar 2009 17:40:21 -0400
From: "Tony McClenny" <[hidden email]>
Subject: [Elecraft] K3 & RIGblaster pro setup
To: <[hidden email]>
Message-ID: <14C6A2990AFD4C89AF4E79C2DF684AF7@ham>
Content-Type: text/plain; charset="us-ascii"

If anyone is using this combination of hardware, please advise the interface
cable connections you are using.  Thanks.  I have been using the RIGblaster
pro with my Kenwood TS-570D (has worked very well) and now need to construct
a new interface cable for the RIGblaster pro to K3.

- Tony -
  N3ME


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html