K3 RIT Function

[Elliott Lawrence-3]

I have S/N 3381 up and running and trying to get used to all of the new buttons and knobs.  I'm enjoying all of the features and the especially the NR cabability.

I just found that I can tune the receiver using the RIT knob without the RIT button engaged and the RIT icon not shown on the display. This seems strange to me as I did not notice this before.  I'm using firmware 3.30.  Have I accidently engaged something when I pushed and held the PF1 button??

Elliott WA6TLA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dick Dievendorff]

Do you have CONFIG:VFO OFS on?  See page 61 of the owner's manual that
describes tuning the rig with the RIT control.

Dick, K6KR


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Elliott Lawrence
Sent: Wednesday, September 16, 2009 12:12 PM
To: Elecraft List
Subject: [Elecraft] K3 RIT Function

I have S/N 3381 up and running and trying to get used to all of the new
buttons and knobs.  I'm enjoying all of the features and the especially the
NR cabability.

I just found that I can tune the receiver using the RIT knob without the RIT
button engaged and the RIT icon not shown on the display. This seems strange
to me as I did not notice this before.  I'm using firmware 3.30.  Have I
accidently engaged something when I pushed and held the PF1 button??

Elliott WA6TLA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elliott Lawrence-3]

OK if at first you don't succeed try reading the manual.  For some reason
VFO OFS got changed to ON from OFF.  Everything is normal for me now  after
changing it back to OFF.  Lots of features and I'm still learning!

Sorry for the too quick message to the list!
73
Elliott WA6TLA


----- Original Message -----
From: "Elliott Lawrence" <[hidden email]>
To: "Elecraft List" <[hidden email]>
Sent: Wednesday, September 16, 2009 12:11 PM
Subject: [Elecraft] K3 RIT Function

>I have S/N 3381 up and running and trying to get used to all of the new
>buttons and knobs.  I'm enjoying all of the features and the especially the
>NR cabability.
>
> I just found that I can tune the receiver using the RIT knob without the
> RIT button engaged and the RIT icon not shown on the display. This seems
> strange to me as I did not notice this before.  I'm using firmware 3.30.
> Have I accidently engaged something when I pushed and held the PF1
> button??
>
> Elliott WA6TLA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html