Perhaps the Rx lines in the cable aren't connecting right. It appears that
when the computer sends data to the K3 the radio is receiving it, because
the radio follows a bandmap click. However the computer isn't "hearing" the
stuff the K3 should be sending.
I'd try another cable.
Dick, K6KR
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of Adriano
Sent: Thursday, March 03, 2011 12:12 PM
To:
[hidden email]
Subject: [Elecraft] {K3} RS 232
Hello
Due to my problem on the KUSB adapter, i tried to connect the K3 on the PC
via a serial to serial cable (DB9 male to DB9 female).
On the N1MM i can click on a station on the bandmap and the radio follows
but when i move the dial nothing happens. Also the frequency o N1MM doesn´t
move when i turn the dial.
I checked the wires inside the cable and all of them looks ok.
On the K3 Utility nothing happens too.
Any clues pse ? The ARRL is coming and i´m desperate.
TNX de PY2ADR / ZY2C
Adriano Perazio
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
