> After that, it looks like the radio "keeps time" all
by itself using internal software routines... This is
is what I gather from watching the time while messing
with the radio. It seems that it does not look at the
real time clock chip again, UNLESS you change bands,
or power off and on again.
-------------------------------------------------
Oh bugger - I only find this out AFTER receiving my K3
and performing inventory. Now I have to pack it all up
and ship it back. I cannot accept delivery of the K3
in this dreadful condition. ;-)
...NOT!!!!
[Elecraft] K3 RTC - Battery and more
David Ferrington, M0XDF M0XDF at Alphadene.co.uk
Fri Jan 25 06:22:01 EST 2008
Previous message: [Elecraft] On it's way
Next message: [Elecraft] K3 - SignaLink USB
Messages sorted by: [ date ] [ thread ] [ subject ] [
author ]
--------------------------------------------------------------------------------
OK understand now and you are correct - see embedded
comments ...
On 25/1/08 11:01, "Arnie Grubbs" <vhuntertdi at
yahoo.com> sent:
> The radio has a Real Time Clock chip that keeps
track of the
> time when the radio is powered off. From what I
see, the
> radio will 'read' that chip to find out what the
time is when it powers up.
> After that, it looks like the radio "keeps time" all
by itself using internal
> software routines...
> This is is what I gather from watching the time
while messing
> with the radio. It seems that it does not look at
the real time clock chip
> again,
> UNLESS you change bands, or power off and on again.
Right, yes I see that now, in fact, it drifts out
quite a lot if you don't
change band. Since I posted, and had left it on one
band, it had drifted 30
seconds in 1 hour.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
