> But if I send my call say 2 x, apparently there is no space
> between calls (e.g. G3XGCG3XGC, rather than G3XGC G3XGC etc...).
> Anyone
> know what the spacing character is?
> 73
> Geoff G3XGC
> K3 225
This was fixed in a later revision of the firmware. Update your K3
and the
spaces will be transmitted properly.
73,
Ed - P49X (W0YK)
Thanks Ed - I have the latest version. What was happening was that I
was sending my call 2x from the CW memory (no spaces) but the serial
no. by hand (with spaces). Looks like the latter method worked OK (but
not the former) according to on-air report from M0DDT. The spaceless
callsign confused his MMTTY software!
In future I will make sure I leave appropriate spaces when sending my
call from memory
73
Geoff Cottrell G3XGC
K2, K3 (S/N 225)
G-QRP 12155
RSGB; ARRL
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
