K3 RTTY problem

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 RTTY problem

n1ix
I am having a problem with receiving RTTY signals. It worked before so I assume it is something I have set incorrectly.
There is no  display of anything on any of the RTTY applications. No waterfall, nothing at all. I have tried different computers and multiple applications with the same results. I have adjusted the line out item in the config menu to full scale.
I plugged headphones into the line out jack I can hear the RTTY signal but it seems to be attenuated. Although I don't know how loud it should be.
BTW: transmit doesn't work at all. That will be the subject of another email.
Any help would be appreciated.
 
Dave N1IX

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K3 RTTY problem

Dave Hachadorian
One thing to check:

In DATA mode, press and hold the PITCH button. The displayed
mark and shift frequencies must match MMTTY or whatever
decoding program you are using. Which program or TU are you
using?

Dave Hachadorian, K6LL
Yuma, AZ

----- Original Message -----
From: "N1IX" <[hidden email]>
To: <[hidden email]>
Sent: Sunday, February 01, 2009 9:17 PM
Subject: [Elecraft] K3 RTTY problem


I am having a problem with receiving RTTY signals. It worked
before so I assume it is something I have set incorrectly.
There is no  display of anything on any of the RTTY
applications. No waterfall, nothing at all. I have tried
different computers and multiple applications with the same
results. I have adjusted the line out item in the config
menu to full scale.
I plugged headphones into the line out jack I can hear the
RTTY signal but it seems to be attenuated. Although I don't
know how loud it should be.
BTW: transmit doesn't work at all. That will be the subject
of another email.
Any help would be appreciated.

Dave N1IX


--------------------------------------------------------------------------------


> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html