K3, RX ANT and Band Outputs

[LA7NO]

Hello,

It appears that the Band Outputs are not according to the selected band
when RX ANT is active.

Anyone who can explain how this is supposed to function?

73 de

Per-Tore / LA7NO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Per-Tore,

The band data outputs should follow the band set on VFO A.  That should
not change with RX ANT in or out.

If you have VFO IND set to ON, the band outputs should still reflect the
band for VFO A.

The other thing that affects the band data output is the menu
CONFIG:KIO3 - if set to TRNS, then the band data output for HF-6 m will
all be zero.  If set to NOR, they should conform to the chart in the manual.

If you have different results, please report it to Elecraft support as a
problem.

73,
Don W3FPR

On 9/30/2016 6:17 PM, Per-Tore Aasestrand wrote:
> Hello,
>
> It appears that the Band Outputs are not according to the selected band
> when RX ANT is active.
>
> Anyone who can explain how this is supposed to function?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]