K3 RX Equalization

[Craig Smith]

I've recently installed the 3.14 firmware.  It's working just fine.  But I
was expecting that the RX equalization could now be saved on a per mode
basis.  Thought I had read something about this on the reflector, but now
can't find where it was.  No mention in the K3 manual either.  Is this still
something that is being planned?  I would like to keep it flat for most
modes, but take out some of the lows and highs for CW.  Would be nice to not
need to reconfigure it when changing modes.

Thanks and 73      Craig  AC0DS




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[KK7P]

> I've recently installed the 3.14 firmware.  It's working just fine.  But I
> was expecting that the RX equalization could now be saved on a per mode
> basis... Is this still something that is being planned?

Yes, it is on The List.

73,

Lyle KK7P

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Brett Howard]

One other thing that I'd enjoy to see on the list that should be relatively
easy (while the hood is up) is have an undo for the CLR feature.  I really
like being able to pretty CLR and set the EQ to flat.  But I'd also really
like being able to press it again and have it set back to what it was before
pressing CLR.  This would then allow one to easily A/B compare their
settings to flat.

Just a thought.

Thanks all...

~Brett

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Lyle Johnson
Sent: Monday, July 06, 2009 1:35 PM
To: [hidden email]
Cc: [hidden email]
Subject: Re: [Elecraft] K3 RX Equalization

> I've recently installed the 3.14 firmware.  It's working just fine.  But I
> was expecting that the RX equalization could now be saved on a per mode
> basis... Is this still something that is being planned?

Yes, it is on The List.

73,

Lyle KK7P

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[pd0psb]

Yes, it is on The List.
73,
Lyle KK7P


>>With capitals that is ,which says enough about That List:-)

73'
Paul
PD0PSB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html