[K3] RX Loop gain setting

I'm using a small DEMI 6m preamp in the RX In/Out loop of the KXV3A, and
would like to be able to inform the radio of its gain so that the
S-meter and rx noise floor would accurately reflect the improved noise
figure due to the preamp.  (s-meter reading would not be inflated, and
the lowered noise floor would be evident in both the s-meter and the
buffered IF output of the KXV3A)

Is that possible?

73, Dale
WA8SRA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html