Tnx Vic, yes Mike K6MKF pointed that out to me also and that was the problem. Operator error once again. Thanks guys ! Now, excuse me while I go wash the egg off my face. This is an awesome group.
Jim
W7OUU
----- Original Message -----
From: "Vic Rosenthal" <
[hidden email]>
To: "Jim Kennedy" <
[hidden email]>
Cc: "elecraft" <
[hidden email]>
Sent: Wednesday, September 30, 2020 10:49:53 PM
Subject: Re: [Elecraft] K3 RX dead 80/20 meters
RX ANT not activated on 80 and 20?
Victor 4X6GP
> On 1 Oct 2020, at 6:58, Jim Kennedy <
[hidden email]> wrote:
>
> Hello all, I need some help ! My K3 s/n 3378 has gone deaf on 80 and 20 meters, all other bands are good. It does not have a second receiver installed. I have confirmed the receive signal on the other bands is good with my HP 8640B signal generator. I can get a signal thru it on 80/20 meters but it takes a ton of RF from the signal generator. The attenuator is not on nor the preamp. The internal antenna tuner works as expected. I have normal power out on all bands including 80/20 meters measured with a Bird 43 and Bird dummy load. Any help would be much appreciated.
>
> Jim
> W7OUU
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
