K3 Real Time Clock Display

[Terry Schieler]

I have had the clock displayed on my K3 since day one.  Today I noticed that tapping DISP only rotates between the VFO B Frequency readout and the current date.  Went into CONFIG and TIME and the clock was still set to the second.  I’m sure it’s something simple I bumped somewhere along the line. 

 

Any help would be appreciated.  Direct preferred as I get the reflector in digest mode and on a different computer than this one.

 

Thanks.

 

Terry, W0FM

K3/100 #474

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Gilbert Cross]

        Just checked my RTC for correct time. Has been running a year now and was only 2 min.- 8 sec slow. Not bad....

 

            73  Gil

----- Original Message -----

From: [hidden email]

To: [hidden email]

Sent: Saturday, November 22, 2008 7:34 PM

Subject: [Elecraft] K3 Real Time Clock Display

I have had the clock displayed on my K3 since day one.  Today I noticed that tapping DISP only rotates between the VFO B Frequency readout and the current date.  Went into CONFIG and TIME and the clock was still set to the second.  I’m sure it’s something simple I bumped somewhere along the line. 

 

Any help would be appreciated.  Direct preferred as I get the reflector in digest mode and on a different computer than this one.

 

Thanks.

 

Terry, W0FM

K3/100 #474

---

_______________________________________________

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Rick Dettinger-3]

Mine has been gaining a little over 1 second a month.  I had assumed  
that the RTC used the TCXO as a time base but it doesn't.  It has its  
own oscillator.

73
Rick Dettinger K7MW


On Nov 23, 2008, at 7:36 AM, Gil Cross wrote:

>         Just checked my RTC for correct time. Has been running a  
> year now and was only 2 min.- 8 sec slow. Not bad....
>
>             73  Gil
> ----- Original Message -----
> From: Terry Schieler
> To: [hidden email]
> Sent: Saturday, November 22, 2008 7:34 PM
> Subject: [Elecraft] K3 Real Time Clock Display
>
> I have had the clock displayed on my K3 since day one.  Today I  
> noticed that tapping DISP only rotates between the VFO B Frequency  
> readout and the current date.  Went into CONFIG and TIME and the  
> clock was still set to the second.  I’m sure it’s something simple I  
> bumped somewhere along the line.
>
> Any help would be appreciated.  Direct preferred as I get the  
> reflector in digest mode and on a different computer than this one.
>
> Thanks.
>
> Terry, W0FM
> K3/100 #474
>
>
> _______________________________________________
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com