K3 Rear Panel Mirror Image

[N5NA]

I recently created a mirror image of the K3 rear panel.  I find this
handy to place behind my K3 to assist in plugging cables in the correct
jacks.

Anyone who may find this of use is welcome to download it from
<http://www.n5na.net/download/k3_rear_panel_mirror.pdf>

73,

Alan  N5NA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[W0FK]

Very handy tool Alan. Thanks!

73,

Lou, W0FK

Alan Sewell N5NA wrote

I recently created a mirror image of the K3 rear panel.  I find this
handy to place behind my K3 to assist in plugging cables in the correct
jacks.

Anyone who may find this of use is welcome to download it from
<http://www.n5na.net/download/k3_rear_panel_mirror.pdf>

73,

Alan  N5NA

[Gary, W7TEA]

Thanks Alan!!

73, Gary W7TEA

[Deni F5VJC]

Good show Allan, very useful.
Thanks,
Deni F5VJC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Alan D. Wilcox, W3DVX]

Great idea! Many thanks.
Printed, so now when I need to reach back there, I put the print on the
top of the K3.
Cheers,
Alan :)

Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701



Alan Sewell N5NA wrote:

> I recently created a mirror image of the K3 rear panel.  I find this
> handy to place behind my K3 to assist in plugging cables in the correct
> jacks.
>
> Anyone who may find this of use is welcome to download it from
> <http://www.n5na.net/download/k3_rear_panel_mirror.pdf>
>
> 73,
>
> Alan  N5NA
> ______________________________________________________________
>  

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[David Gilbert]

I also find it to be very useful, enough so that I would encourage
Elecraft to arrange with N5NA to include it in the next revision to the
K3 manual.

73,
Dave   AB7E



On 6/7/2010 6:16 AM, Alan D. Wilcox wrote:

> Great idea! Many thanks.
> Printed, so now when I need to reach back there, I put the print on the
> top of the K3.
> Cheers,
> Alan :)
>
> Alan D. Wilcox, W3DVX (K2-5373, K3-40)
> 570-321-1516
> http://WilcoxEngineering.com
> Williamsport, PA 17701
>
>
>
> Alan Sewell N5NA wrote:
>    
>> I recently created a mirror image of the K3 rear panel.  I find this
>> handy to place behind my K3 to assist in plugging cables in the correct
>> jacks.
>>
>> Anyone who may find this of use is welcome to download it from
>> <http://www.n5na.net/download/k3_rear_panel_mirror.pdf>
>>
>> 73,
>>
>> Alan  N5NA
>> ______________________________________________________________
>>
>>      
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>    

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[N5NA]

Of course it's Elecraft's image so there's nothing to arrange with me.  I just flipped it around and redid the labels so they weren't backwards.

But I WOULD be flattered if Elecraft decided to use my little idea!

73,  Alan  N5NA

David Gilbert wrote

I also find it to be very useful, enough so that I would encourage
Elecraft to arrange with N5NA to include it in the next revision to the
K3 manual.

73,
Dave   AB7E



On 6/7/2010 6:16 AM, Alan D. Wilcox wrote:
> Great idea! Many thanks.
> Printed, so now when I need to reach back there, I put the print on the
> top of the K3.
> Cheers,
> Alan :)
>
> Alan D. Wilcox, W3DVX (K2-5373, K3-40)
> 570-321-1516
> http://WilcoxEngineering.com
> Williamsport, PA 17701
>
>
>
> Alan Sewell N5NA wrote:
>    
>> I recently created a mirror image of the K3 rear panel.  I find this
>> handy to place behind my K3 to assist in plugging cables in the correct
>> jacks.
>>
>> Anyone who may find this of use is welcome to download it from
>> <http://www.n5na.net/download/k3_rear_panel_mirror.pdf>
>>
>> 73,
>>
>> Alan  N5NA
>> ______________________________________________________________
>>

[Alan D. Wilcox, W3DVX]

Alan,
The landscape print of the image is just about full-scale, and that
makes it even easier to use.  :)

Here's a thought: Rotate the image along the horizontal axis, so that
when it's on top of the K3, it matches the exact connector vertical
locations as well. As one might feel when reaching over the top. (Not
what we'd do with our old tube rigs and high voltage! hi)

Thanks again! 73, Alan

Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701


N5NA wrote:

> Of course it's Elecraft's image so there's nothing to arrange with me.  I
> just flipped it around and redid the labels so they weren't backwards.
>
> But I WOULD be flattered if Elecraft decided to use my little idea!
>
> 73,  Alan  N5NA
>
>
>
> David Gilbert wrote:
>  
>> I also find it to be very useful, enough so that I would encourage
>> Elecraft to arrange with N5NA to include it in the next revision to the
>> K3 manual.
>>
>> 73,
>> Dave   AB7E
>>    

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[N5NA]

Thanks for the suggestion Alan.  I've added that perspective as page two
of the pdf.  Just re-download the pdf at
<http://www.n5na.net/download/k3_rear_panel_mirror.pdf> and you'll have
both views.

73,

Alan  N5NA

Alan D. Wilcox wrote:

> Alan,
> The landscape print of the image is just about full-scale, and that
> makes it even easier to use.  :)
>
> Here's a thought: Rotate the image along the horizontal axis, so that
> when it's on top of the K3, it matches the exact connector vertical
> locations as well. As one might feel when reaching over the top. (Not
> what we'd do with our old tube rigs and high voltage! hi)
>
> Thanks again! 73, Alan
>
> Alan D. Wilcox, W3DVX (K2-5373, K3-40)
> 570-321-1516
> http://WilcoxEngineering.com
> Williamsport, PA 17701
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Alan D. Wilcox, W3DVX]

Perfect! Take your choice.  :)

Electraft: Consider putting the link to the pdf on
http://www.elecraft.com/K3/K3.htm

73, Alan

Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701



Alan Sewell N5NA wrote:

> Thanks for the suggestion Alan.  I've added that perspective as page
> two of the pdf.  Just re-download the pdf at
> <http://www.n5na.net/download/k3_rear_panel_mirror.pdf> and you'll
> have both views.
>
> 73,
>
> Alan  N5NA
>
> Alan D. Wilcox wrote:
>> Alan,
>> The landscape print of the image is just about full-scale, and that
>> makes it even easier to use.  :)
>>
>> Here's a thought: Rotate the image along the horizontal axis, so that
>> when it's on top of the K3, it matches the exact connector vertical
>> locations as well. As one might feel when reaching over the top. (Not
>> what we'd do with our old tube rigs and high voltage! hi)
>>
>> Thanks again! 73, Alan
>>
>> Alan D. Wilcox, W3DVX (K2-5373, K3-40)
>> 570-321-1516
>> http://WilcoxEngineering.com
>> Williamsport, PA 17701
>>
>>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Eric Swartz - WA6HHQ]

Alan - thanks for doing this!

I've added these to the links at the bottom of the K3 page at:
http://www.elecraft.com/K3/K3.htm

73, Eric   WA6HHQ

>
> Alan Sewell N5NA wrote:
>    
>> Thanks for the suggestion Alan.  I've added that perspective as page
>> two of the pdf.  Just re-download the pdf at
>> <http://www.n5na.net/download/k3_rear_panel_mirror.pdf>  and you'll
>> have both views.
>>
>> 73,
>>
>> Alan  N5NA

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html