Method 3 is not yet available in firmware. See "omissions" in the owner's
manual errata:
http://www.elecraft.com/manual/K3_owner's_man_errata_D1-6.pdfDick, K6KR
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of VK5ABQ
Sent: Wednesday, January 07, 2009 2:29 PM
To:
[hidden email]
Subject: [Elecraft] K3: Ref Osc Cal
Has anyone successfully carried out Method 3 of the Reference Oscillator
Calibration described on Pg 49 of the manual? The functionality of keys 1, 2
and 3 described in the procedure doesn't seem to work (I've got the 1ppm
TXCO btw). When I bring up REF CAL in the menu I see the osc freq but can't
enter a mode to allow me to enter the oscillator data sheet values. :(
-----
Shane
K3/10: S/N 2127, KBPF3, KFL3B-FM, KFL3A-6K, KFL3A-2.8K, KFL3A-400, KTCXO3-1
& KXV3.
--
View this message in context:
http://n2.nabble.com/K3%3A-Ref-Osc-Cal-tp2125087p2125087.htmlSent from the Elecraft mailing list archive at Nabble.com.
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
