We have a remote station using RemoteRig with multiple users. Some use
mainly CW at 500W, some use SSB, one uses JT65 at about 200W. Would
like to have PF1 or 2 contain a macro that puts the station into a
"Normal" configuration.
Does the macro go in each of the control K3's or once in the remote K3,
or is this a problem that has no solution? I know, dumb question, but
remote ops are stressing my ham knowledge. While we're at it, can the
macro be programmed from a control K3, or does it have to be done
hands-on at the remote station?
73,
Fred K6DGW
Sparks NV
Washoe County DM09dn
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
