K3 Request VFO round freq when coarse tune

[pa4la]

 

K3 FW feature request:

Freq rounding when coarse tune as an option

 

Rounding of frequencies for digits smaller than the step size when using coase tuning.

Perhaps independent settings for mode and/or depending on frequency range.

 

VFO_OFS=ON, using rit/xit when off for coarse tune

 

Example rounding:

Mode AM, coarse step 1khz

Freq 7012.45 when using coarse tune I see 7013.45, 7014.45 etc for the next steps

It would be nice to see 7013.00, 7014.00.

 

Same as on 10mtr FM 5 khz coarse.

First you have to tune the vfo to the round freq (channel), only then you can effectively use coarse tune to hop through the channels.

 

An extra feature could be automatic “channel” frequency set within a part of the spectrum

The European Medium wave band is a good example, 9khz channels beginning at 531Khz ending 1620Khz

BC, CB, 10mtr FM and even some digimodes on 20m are more examples

Coarse tune could be a nice operational feature to quickly scan “canalized” activity on a band.

 

But.. well… when I read this..I get a dejavu.

I talk about the channel encoder function as on my gd old TS850.

Could that “tool” be implemented pse?

 

Thanks in advance,

 

Hugo pa4la

 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Michael Reichardt-2]

Here the same desire.

It would be very nice to have this feature.

 

It is very comfortable when you tune over the 80 Meter Band in Germany with that feature, because most of the SSB-Groups are on round frequencies.

 

73 de

Michael, DL2YMR

 

 

Von: Hugo pa4la [mailto:[hidden email]]
Gesendet: Montag, 15. Dezember 2008 11:10
An: [hidden email]
Betreff: [Elecraft] K3 Request VFO round freq when coarse tune

 

 

K3 FW feature request:

Freq rounding when coarse tune as an option

 

Rounding of frequencies for digits smaller than the step size when using coase tuning.

Perhaps independent settings for mode and/or depending on frequency range.

 

VFO_OFS=ON, using rit/xit when off for coarse tune

 

Example rounding:

Mode AM, coarse step 1khz

Freq 7012.45 when using coarse tune I see 7013.45, 7014.45 etc for the next steps

It would be nice to see 7013.00, 7014.00.

 

Same as on 10mtr FM 5 khz coarse.

First you have to tune the vfo to the round freq (channel), only then you can effectively use coarse tune to hop through the channels.

 

An extra feature could be automatic “channel” frequency set within a part of the spectrum

The European Medium wave band is a good example, 9khz channels beginning at 531Khz ending 1620Khz

BC, CB, 10mtr FM and even some digimodes on 20m are more examples

Coarse tune could be a nice operational feature to quickly scan “canalized” activity on a band.

 

But.. well… when I read this..I get a dejavu.

I talk about the channel encoder function as on my gd old TS850.

Could that “tool” be implemented pse?

 

Thanks in advance,

 

Hugo pa4la

 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com