The K3 shows no reaction on changing the volume or rf-gain, but it shows
reaction on changing the bandwidth etc. I can hear a test signal from a
transmitter, with no antenna connected to the K3. The signal i hear does
not change when increasing power, no s-meter deflection. So i assume the
rx itself is ok, but the received signal is not amplified by the stages
after the rx.
Also, the K3 fails to transmit.
Any comments?
--
73, DM4iM
K2 #2706
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
