K3 - S-meter zero

[k6dgw]

For the first time in years, I have no antenna connected to my K3 in our
new digs, and the S-Meter sits at S3.  What's going on and how do I get
it to zero with no input?

I'd research this in the manual and Fred's book, if I knew where they
were, we're still finding stuff in boxes that haven't been unpacked.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015
- NEXT WEEKEND!!
- www.cqp.org
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[KD7PY]

1st thing is to set the RF gain to max,
check in:

  Config SMTR OF 024
            SMTR SC 014
            SMTR MD  NOR  when pre amp or attn is used it will effect the S meter,
                                    if you don't want it to change set to ABS

  Ed   KD7PY  ex K7WIA