Bob,
What are your specific questions? I have the K3 with SDR-IQ here.
I've used it both with the IF connection (as a panadapter) and with
an RF connection (RX Out/RX In and a splitter) for CW Skimmer.
It was in use for about a year but is off-line at the present - I'm
not completely sure the receiver hasn't been damaged and don't have
the time to trouble shoot it right now (either RX problem or computer
issue).
73,
... Joe, W4TV
On 12/2/2012 9:52 PM, KD7YZ Bob wrote:
> Howdy K3' people:
>
> I did some more research on my goals of using my new K3, & Sub-RX with
> matching 8-pole, for low-low bands.
>
> If anyone uses the actual SDR-IQ with a K3, I would like some guidance.
> And I' would like to ask is it possible to listen/hear a particular
> point on the displayed segment when used in conjunction with the K3?
>
> On-List or direct email, either way, I'd like to get one this week, so
> answers would really help out. :-B
>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
