K3 SN5035 HI SIG

[DO5MZ]

Hello

ich have a problem with my K3. I have today installed KPA3 and KXV3A at the configure  says the display  HI SIG. I have installet am Dummyload un antenna output.
Where ist the problem ???


73 Markus

[Don Wilhelm-4]

  Markus,

I do not know the specific problem, but the HI SIG message indicates
that the K3 is seeing a large signal on the receiver input.

I would review the installation steps for the KXV3A and the KPA3 to be
certain no step was omitted.

73,
Don W3FPR

On 6/29/2011 9:20 AM, DO5MZ wrote:

> Hello
>
> ich have a problem with my K3. I have today installed KPA3 and KXV3A at the
> configure  says the display  HI SIG. I have installet am Dummyload un
> antenna output.
> Where ist the problem ???
>
>
> 73 Markus
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/K3-SN5035-HI-SIG-tp6528930p6528930.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[DO5MZ]

Hello Don

The K3 also reacts very slowly, an antenna is not connectet.
I will bring back the K3 on 10W and see what happens

73 Markus

[DO5MZ]

hello

at my K3 is R66, Q8 and Q9 dead. The emitter voltage across R75 ist over 0,52V and R66 are dark.

73

Markus