K3 SSB TX BP Adjust

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K3 SSB TX BP Adjust

Ray Kiesel
Would like to know if the adjustable transmit DSP bandpass
is on the short list for inclusion in the menu.  (Maybe I missed
it in the manual?)

I plan to use a narrow tx bandpass (400Hz to 2.6kHz) to have
maximum power concentrated where many receivers have
their effective receive passband.  I'll most likely get a lot of time
using the processor too.  Compromise antennas and low power
from my location call for these operating parameters to be
engaged.

It would also be good to go with a narrower passband when
operating on 60M to stay well within the occupied bandwidth
limits assigned to that band here in the U.S.

Thanks.
Ray Kiesel   K3RIZ

P.S.  VERY nice operating manual!  Great job!
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K3 SSB TX BP Adjust

Eric Swartz - WA6HHQ
Administrator
Our 8 and TX EQ will allow you to do exactly this.
73, Eric  WA6HHQ
---

Ray Kiesel wrote:

> Would like to know if the adjustable transmit DSP bandpass
> is on the short list for inclusion in the menu.  (Maybe I missed
> it in the manual?)
>
> I plan to use a narrow tx bandpass (400Hz to 2.6kHz) to have
> maximum power concentrated where many receivers have
> their effective receive passband.  I'll most likely get a lot of time
> using the processor too.  Compromise antennas and low power
> from my location call for these operating parameters to be
> engaged.
>
> It would also be good to go with a narrower passband when
> operating on 60M to stay well within the occupied bandwidth
> limits assigned to that band here in the U.S.
>
>  
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K3 SSB TX BP Adjust

Eric Swartz - WA6HHQ
Administrator
.. 8 Band...   :-)
---

Eric Swartz - WA6HHQ, Elecraft wrote:
> Our 8 and TX EQ will allow you to do exactly this.
> 73, Eric  WA6HHQ
>
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com