K3 SUB BAND 2 METER

[Andrea Abati (ik4olq)]

Hi

I have a Elecraft K 3 full option.

When I have  2 meter in sub band and I active it the rig say " use aux" and
no rx.

How can fix it ?

73 de ik4olq

 

   Andrea Abati

Cell 333 4551059

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Win Kriegl DK9IP/KH7CD]

Hi Andrea,

this posting from W2ZK (from the archives) gives the answer I hope...

73, Win DK9IP

> "If the two receivers are sharing the main
> antenna path, putting the sub receiver on a
> higher-frequency band than main may result in
> signal loss in the sub. This is due to sharing of the
> main receiver´s low-pass filters. If you select an
> incompatible band combination, the K3 briefly
> displays USE AUX as a warning. To avoid sub
> receiver signal loss, use the sub´s AUX input."
>
> 73, Ted, W2ZK

Am 06.08.2013 10:43, schrieb Andrea Abati (ik4olq):

> Hi
>
> I have a Elecraft K 3 full option.
>
> When I have  2 meter in sub band and I active it the rig say " use aux" and
> no rx.
>
> How can fix it ?
>
> 73 de ik4olq
>
>
>
>     Andrea Abati
>
> Cell 333 4551059
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html