K3 SUB RX question

[dennis rosenbalm]

I am in need of advice please......

I want to use an OCF non-resonant dipole through the K3ATU to the SUB RX
and use a vertical for the MAIN RX antenna for diversity reception. Then
I want the SUB RX to mute in transmit mode while transmitting on the
vertical.

Is this possible? How do I configure this with the K3 controls?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[John_N1JM]

Sub rcvr always mutes during tx.
John N1JM

[N5GE-2]

When using QSK on CW the SUB allows QSK and the band noise can be
heard between dits and dahs, so it does mute, but may display some
undesired behavior.

Unless you feel you must work QSK while in the configuration you
mentioned, it should work fine, but beware. Nothing can help you if
RX antenna is too close to the TX antenna.  Muting can't help prevent
damage if there's just too much signal on the RX antenna input.

Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member

On Mon, 26 Nov 2012 17:22:29 -0800 (PST), John_N1JM
<[hidden email]> wrote:

>Sub rcvr always mutes during tx.
>John N1JM

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html