Mike Scott wrote:
> I just started to use the scanning capability of the K3. After scanning the
> 17M CW segment with some success, I thought, wow lets go scan 6M CW segment.
>
> I get an error saying scanning not allowed on this band. I can't think of a
> better use for scanning than 6M to find an opening.
>
> Now I wonder why scanning doesn't work on 6M, I didn't find anything in the
> manual.
I believe the reason is something like this: FCC regulations require
that a 'scanner' capable of operating above 30 mHz must be certified to
be blocked for cellular frequencies (around 800-900 mHz I think). In
order to keep from delaying the release of the K3 any longer while
getting this certification, Elecraft chose to block scanning above 30
mHz. At some point they will likely do what's necessary for the
appropriate paperwork and then enable scanning on 6 meters.
Your (if you live in the US) government at work. Note: I do not work for
Elecraft, this is not an 'official' explanation.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
