[K3} Screws falling out

[Barry]

Recently, I moved my K3 to work with cables behind it, and noted that 2 of the small case screws had fallen out and were on the desktop.  Prior to this, the radio had not been moved for at least a year.  Anyone else notice this issue?

Barry W2UP

[Nr4c]

No, I haven't had this problem, however, it must be noted that my K3 gets
moved for portable events, shows, etc quite often.  But, I have only noted
one 'loose' screw, and no screws actually out.  The loose one I attributed
to having recently removed/reinstalled the side panel, and I usually leave
them all slightly loose until they are all started, and then tighten up in a
criss-cross pattern, much like torquing an engine head.

...bill  nr4c

-----Original Message-----
From: Barry [mailto:[hidden email]]
Sent: Friday, April 06, 2012 9:11 AM
To: [hidden email]
Subject: [Elecraft] [K3} Screws falling out

Recently, I moved my K3 to work with cables behind it, and noted that 2 of
the small case screws had fallen out and were on the desktop.  Prior to
this, the radio had not been moved for at least a year.  Anyone else notice
this issue?

Barry W2UP

--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Screws-falling-out-tp7442980p7442980
.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html