Elecraft

K3 - Selecting a freq memory slot via a CAT command

Classic

List

Threaded

3 messages Options

k6dgw

K3 - Selecting a freq memory slot via a CAT command

I've gone through the K3 command list several times and I can't find a
command that allows me to select a specific frequency memory channel
from a macro. I've been making a few CW QSO's on 60 m, I have an empty
slot on my KPOD, and I'd like to:

M>V
Select slot
M>V

My 60 meter slots are set up for channel hopping thru the 5 "channels"
with VFO A set to center of channel [CW, PSK] and VFO B set to the
suppressed carrier frequency for USB.

73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

Grant Youngman-2

Re: K3 - Selecting a freq memory slot via a CAT command

Look at the MCnnn; command, p15 of the Programmer’s Reference.

Sent from my iPhone

> On Aug 30, 2019, at 7:00 PM, Fred Jensen <[hidden email]> wrote:
>
> I've gone through the K3 command list several times and I can't find a command that allows me to select a specific frequency memory channel from a macro. I've been making a few CW QSO's on 60 m, I have an empty slot on my KPOD, and I'd like to:
>
> M>V
> Select slot
> M>V
>
> My 60 meter slots are set up for channel hopping thru the 5 "channels" with VFO A set to center of channel [CW, PSK] and VFO B set to the suppressed carrier frequency for USB.
>
> 73,
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

k6dgw

Re: K3 - Selecting a freq memory slot via a CAT command

Thanks for the replies. Can't explain how I missed MCnnn;, I made 3
passes thru the table.

73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 8/30/2019 5:50 PM, Grant Youngman wrote:

> Look at the MCnnn; command, p15 of the Programmer’s Reference.
>
> Sent from my iPhone
>
>> On Aug 30, 2019, at 7:00 PM, Fred Jensen <[hidden email]> wrote:
>>
>> I've gone through the K3 command list several times and I can't find a command that allows me to select a specific frequency memory channel from a macro. I've been making a few CW QSO's on 60 m, I have an empty slot on my KPOD, and I'd like to:
>>
>> M>V
>> Select slot
>> M>V
>>
>> My 60 meter slots are set up for channel hopping thru the 5 "channels" with VFO A set to center of channel [CW, PSK] and VFO B set to the suppressed carrier frequency for USB.
>>
>> 73,
>> Fred ["Skip"] K6DGW
>> Sparks NV DM09dn
>> Washoe County
>>