K3: Shift behaviour
Locked
 
|
Hello friends,
want to know if i missed something: - when on CW mode turning SHIFT to low-end it is going to 0.00 and then jump to 2.7 and radio is "off" (no signal like I/F switched off). It is for BANDWIDTH 2.8kHz and the same for 0.05kHz so bandwidth independent. On SSB mode SHIFT is going to 0.4 and stop here, no jump to 2.7. Latest F/W installed. There should be some limits based on PITCH settings and bandwith or not? Tried to look in wiki and nothing about this there. http://www.zerobeat.net/mediawiki/index.php/Firmware_anomalies_that_are_considered_normal Maybe it is known, maybe not, maybe it is not normal, maybe yes... Any comments? 73! L. -dst- K3/10 #272 _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
I can not duplicate this on #202 with the latest firmware. It stops at
FC=0.10 even if I keep rotating the knob anti-clockwise. 73, Ken K3IU Alexandr Kobranov wrote: > Hello friends, > want to know if i missed something: > > - when on CW mode turning SHIFT to low-end it is going to 0.00 and > then jump to 2.7 and radio is "off" (no signal like I/F switched off). > It is for BANDWIDTH 2.8kHz and the same for 0.05kHz so bandwidth > independent. > On SSB mode SHIFT is going to 0.4 and stop here, no jump to 2.7. > Latest F/W installed. > There should be some limits based on PITCH settings and bandwith or not? > Tried to look in wiki and nothing about this there. > > http://www.zerobeat.net/mediawiki/index.php/Firmware_anomalies_that_are_considered_normal > > > Maybe it is known, maybe not, maybe it is not normal, maybe yes... > Any comments? > > 73! > L. -dst- > K3/10 #272 > _______________________________________________ > Elecraft mailing list > Post to: [hidden email] > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
Ok Ken,
thanks, will go through later - maybe there are some other params to check. And reload FW :-) Thanks for now, 73! L. -dst- K3/10 #727 Ken K3IU napsal(a): > I can not duplicate this on #202 with the latest firmware. It stops at > FC=0.10 even if I keep rotating the knob anti-clockwise. > 73, > Ken K3IU > > Alexandr Kobranov wrote: >> Hello friends, >> want to know if i missed something: >> >> - when on CW mode turning SHIFT to low-end it is going to 0.00 and >> then jump to 2.7 and radio is "off" (no signal like I/F switched off). >> It is for BANDWIDTH 2.8kHz and the same for 0.05kHz so bandwidth >> independent. >> On SSB mode SHIFT is going to 0.4 and stop here, no jump to 2.7. >> Latest F/W installed. >> There should be some limits based on PITCH settings and bandwith or not? >> Tried to look in wiki and nothing about this there. >> >> http://www.zerobeat.net/mediawiki/index.php/Firmware_anomalies_that_are_considered_normal >> >> >> Maybe it is known, maybe not, maybe it is not normal, maybe yes... >> Any comments? >> >> 73! >> L. -dst- >> K3/10 #272 >> _______________________________________________ >> Elecraft mailing list >> Post to: [hidden email] >> You must be a subscriber to post to the list. >> Subscriber Info (Addr. Change, sub, unsub etc.): >> http://mailman.qth.net/mailman/listinfo/elecraft Help: >> http://mailman.qth.net/subscribers.htm >> Elecraft web page: http://www.elecraft.com >> > Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
|
|
In reply to this post by Alexandr Kobranov
In a recent message, Alexandr Kobranov <[hidden email]> wrote ...
>want to know if i missed something: > >- when on CW mode turning SHIFT to low-end it is going to 0.00 and then >jump to 2.7 and radio is "off" No, you are not missing anything, L., I am getting exactly the same as you in CW mode only. I have reported it to [hidden email] but have not had an acknowledgement. 73 -- David G4DMP Leeds, England, UK ------ _______________________________________________ Elecraft mailing list Post to: [hidden email] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com |
«
Return to Elecraft
|
1 view|%1 views
| Free forum by Nabble | Edit this page |