[K3} Software command to set VOX gain?

[N7US]

Will a software command be added to a K3 firmware update to be able to set
the VOX gain directly?

I have a macro in DXLab's Commander that switches between two mics, one on
the front panel jack and one on the rear, and I can set the TX EQ, mic gain,
and compressor directly, but I have to change the VOX gain indirectly.  By
that, I mean the macro goes into the menu and issues a bunch of UP or DN
commands.  It works, though is clumsy, and I have to be sure that the VOX
gain starting point of one of the mics is set manually.

For background, I have a Heil headset connected to the real panel and a Heil
PR781 connected to the front panel.  The headset has both an HC4, which I am
using, and an HC5, and I am not using any TX EQ with that.  The PR781 has
lots of TX EQ so it sounds more like communications audio than a broadcast
mic.

Jim N7US




______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html