K3+ Station Master

[Edward R Cole]

I use TX-INHIBIT on my K3 and have a webpage showing how:
http://www.kl7uw.com/TX-INHIBIT.htm

The circuit does include the FT-847 so is more complicated than you
need.  Instead of the voltage regulator you apply 5v thru a 2.2 to
10K resistor directly to pin-7 on the K3 ACC jack.  The Station
Master must ground pin-7 to enable transmitting.  Where you obtain 5v
is an issue and it seems it should be available on one of the ACC
pins.  I'm not doing that.

Ed - KL7UW

------------------------------

Message: 41
Date: Thu, 2 Jun 2011 21:49:26 +0300
From: "Natale Borghetti" <[hidden email]>
Subject: [Elecraft] K3+ Station Master
To: <[hidden email]>
Cc: ik5baf <[hidden email]>
Message-ID: <4B97334D58D747B48357D4EB40E3B482@natale>
Content-Type: text/plain;       charset="iso-8859-1"

Hi OM,

I need some help...I have to connect my K3 to Station Master to have
the TX INIHIBIT, I have understand that have the TX INIHIBIT at pin 7
of K3 and this has to be connected to the TX INIHIBIT of Station Master.
I read page 19 of K3 Manual that says:
"An external 2.2 to 10 K pull-up resistor (to 5VDC) is required".

Well that is NOT very clear to me.....(perhaps I am to old...Hi),
could some more clever explain better how to do it or a small
schematic will be appreciated as example where is the 5VDC ???


I thank you in advance for help and assistance on interpretation..

73 and DX

i5NPH




73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-testing*, 3400-?
DUBUS Magazine USA Rep [hidden email]
======================================
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[K2GN]

I remember some time ago, Elecraft said maybe in Oct/Nov timeframe.
That's great.
Was there anything else released or talked about at Dayton?
Will the tuner do as well as the ATU in the K3?
Inputs for radios?
How many antenna outputs?
Etc..

Thanks in advance,
Planning for the future!!
 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html