[K3] Stuck in Transmit

[David Guernsey]

My K3/10 is stuck in transmit.  I recently changed power strip/surge protector for the power supply to a strip that uses one of the pieces of equipment as a control to turn all the others on and off.  I have my Mac Mini as the control piece of equipment with the monitor and printer power controlled by the computer.  The Astron RS-35M, which supplies power to the K3, is in a non-switched plug on the power strip.  I have read the K3 Owners Manual and can not find any solution for the problem.  I have checked that K3 is not in VOX, and that the PTT is not stuck.  Additionally, if I go into the MENU or CONFIG modes, the VFO B knob does not change the display, so I cannot check the configuration.  Any help would be greatly appreciated.

 
73 de Dave KJ6CBS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill K9YEQ]

Have you tried removing power from the K3 and then power it on?

73,
Bill
K9YEQ


-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of David Guernsey
Sent: Thursday, January 12, 2012 3:00 PM
To: [hidden email]
Subject: [Elecraft] [K3] Stuck in Transmit

My K3/10 is stuck in transmit.  I recently changed power strip/surge
protector for the power supply to a strip that uses one of the pieces of
equipment as a control to turn all the others on and off.  I have my Mac
Mini as the control piece of equipment with the monitor and printer power
controlled by the computer.  The Astron RS-35M, which supplies power to the
K3, is in a non-switched plug on the power strip.  I have read the K3 Owners
Manual and can not find any solution for the problem.  I have checked that
K3 is not in VOX, and that the PTT is not stuck.  Additionally, if I go into
the MENU or CONFIG modes, the VFO B knob does not change the display, so I
cannot check the configuration.  Any help would be greatly appreciated.

 
73 de Dave KJ6CBS

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html