K3 Sub RX Independence

[Stewart Baker]

We're getting closer !
I see that the latest Errata for the KRX3 manual (12/1/09)
includes operating instructions for when the Main and Sub
receivers become fully independent .

Maybe there should be a day named after the event... :-)

73
Stewart G3RXQ

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[wayne burdick]

Stewart Baker wrote:

> We're getting closer !
> I see that the latest Errata for the KRX3 manual (12/1/09)
> includes operating instructions for when the Main and Sub
> receivers become fully independent .
>
> Maybe there should be a day named after the event...

Independence Day?  :)

Definitely making progress on this. Right now I'm listening to a
repeater on 145.23 on VFO A (via an XV144 transverter), and my favorite
AM all-news station (740 kHz) on VFO B.

Yesterday I handed off an early version of this firmware to our field
testers. They'll beat on it for awhile, after which it'll be released
as rev 3.00.

73,
Wayne
N6KR


---

http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Paul Bradbeer]

Nice suggestion Stewart…but will we then have to wait until 4^th of July?!

 

Paul M0CVX

Founded in 1983 - over 25 years of technical excellence.

---

This E-mail is the property of Mass Consultants Ltd. It is confidential and intended only for the use of the addressee or with its permission.  Use by anyone else for any purpose is prohibited.  If you are not the addressee, you should not use, disclose, copy or distribute this e-mail and should notify us of receipt immediately by return e-mail to the address where the e-mail originated.

 

This E-mail may not have been sent through a secure system and accordingly (i) its contents should not be relied upon by any person without independent verification from Mass Consultants Ltd and (ii) it is the responsibility of the recipient to ensure that the onward transmission, opening or use of this message and any attachments will not adversely affect its systems or data. No responsibility is accepted by Mass Consultants Ltd in this regard.

 

Any e-mails that are sent to Mass Consultants Ltd's e-mail addresses may be monitored by systems or persons other than the addressee, for the purposes of ascertaining whether the communication complies with the law and Mass Consultants Ltd's policies.

 

Mass Consultants Ltd is registered in England No. 1705804, Grove House, Rampley Lane, Little Paxton, Cambs., PE19 6EL, United Kingdom. Tel: [phone].

---

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Mark W2OR]

Would be great to have the following options for the SUB for use by Shortwave and AM Broadcast Listeners:

-- for the SUB only, 5-KHz tuning steps for the AM mode shortwave freqs, using the CLR knob.  And 10-KHz or 9-KHz steps for the AM Broadcast band freqs. This for the SUB only.  The current program has this for VFO-A, but not for the SUB only. (Or I han't figured it out yet.)

-- Independent Memory channels just for the SUB.  This for SW Listening and AM Broadcast listening on SUB, without any impact on VFO-A.  The current program Memory channel set-up, as I understand it, impacts both VFO's together, or just VFO-A.
\
Thanks !
73 de Mark

wayne burdick wrote

Stewart Baker wrote:

> We're getting closer !
> I see that the latest Errata for the KRX3 manual (12/1/09)
> includes operating instructions for when the Main and Sub
> receivers become fully independent .
>
> Maybe there should be a day named after the event...

Independence Day?  :)

Definitely making progress on this. Right now I'm listening to a
repeater on 145.23 on VFO A (via an XV144 transverter), and my favorite
AM all-news station (740 kHz) on VFO B.

Yesterday I handed off an early version of this firmware to our field
testers. They'll beat on it for awhile, after which it'll be released
as rev 3.00.

73,
Wayne
N6KR


---

http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [e-mail]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com