K3 Sub RX messed up after Cal

[Stewart Baker]

Hi,
Downloaded and installed V3.35 & V2.34 successfully.

However using the RF Gain calibration procedure in the
K3 Utility V1.2.8.10 seems to have messed up my Sub RX.
The Main RX is OK.

After using the Sub Cal the Sub  RX is now very insensitive.
I have tried repeating the Cal procedure a number of times,
but the end result is still the same.

Help please, as my Sub RX is now pretty deaf...

73
Stewart G3RXQ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Bill W4ZV]

Stewart Baker wrote

Hi,
Downloaded and installed V3.35 & V2.34 successfully.

However using the RF Gain calibration procedure in the
K3 Utility V1.2.8.10 seems to have messed up my Sub RX.
The Main RX is OK.

After using the Sub Cal the Sub  RX is now very insensitive.
I have tried repeating the Cal procedure a number of times,
but the end result is still the same.

Help please, as my Sub RX is now pretty deaf...

Help is on the way!  New 3.36/2.25 fix this and the gain balance and calibration is the best ever.

73,  Bill