K3 Sub Receiver forces FSK D to AFSK A

[Ralph]

This problem also happens everytime you tap REV.  It resets VFO A (FSK D) back to AFSK A.  I found this out chasing TX3A around on RTTY yesterday.  Everytime I found a clear spot to put VFO B (using REV) VFO A flipped to AFSK A so I could never make my call.   That doesn't work out too well in a big pileup.  Versions 3.57 and 3.54 both have this problem.  If you need this to work before the next version is released, you will need to go back to v3.52.

Ralph K1ZZI      

>> From: [hidden email]
>> [mailto:[hidden email]] On Behalf Of Bud
>> Governale, W3LL
>> Sent: Thursday, November 12, 2009 4:53 PM
>> To: [hidden email]
>> Subject: [Elecraft] K3 Sub Receiver forces FSK D to AFSK A
>>
>>
>> I've always used FSK D mode.
>>
>> Since updating to 3.57 when I turn on the Sub Receiver the
>> radio goes into AFSK A.
>>
>> How do I stop the SUB from changing FSK D to AFSK A?
>>
>> In the past the radio was always in FSK D and the SUB did not
>> change this.
>>
>> I'm in VFO A and check DATA MD. It says FSK D.
>>
>> Turn on SUB and check DATA MD it now says AFSK A.
>>
>> Thanks,
>>
>> Bud W3LL
>> [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[wayne burdick]

Fixed in 3.58, due out soon.

tnx
Wayne
N6KR

On Nov 13, 2009, at 10:37 AM, Ralph wrote:

> This problem also happens everytime you tap REV.  It resets VFO A  
> (FSK D) back to AFSK A.  I found this out chasing TX3A around on  
> RTTY yesterday.  Everytime I found a clear spot to put VFO B (using  
> REV) VFO A flipped to AFSK A so I could never make my call.   That  
> doesn't work out too well in a big pileup.  Versions 3.57 and 3.54  
> both have this problem.  If you need this to work before the next  
> version is released, you will need to go back to v3.52.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html