K3: Synth3A and KBPF3 upgrade

[Edward R Cole]

Have finished installing new synth boards (2) and the mods to the KBPF3.

Everything appears to work.  Downloaded 5.60 vers S from Elecraft.
HF and VHF working.  Haven't yet explored tuning below 500-KHz as the
630m Inverted-L is not yet connected.

Spent about three hours of which one was spent on the filter.  0603
chip caps take some patience; I elected to remove the old caps vs
laying the new on piggyback.  I've found it harder than installing a
cap direct to pcb.

Let the list know how it does on 630m.

73, Ed - KL7UW
   http://www.kl7uw.com
Dubus-NA Business mail:
   [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]