I am often to be found monitoring one of the CW QRP frequencies and
usually have the bandwidth set very narrow to minimise band noise, so
it's nice to know that if someone calls right on the frequency I will
hear them. I have the KTCXO3-1 TCXO and find it remains within 20 Hz at
50 MHz when checked against the 5th harmonic of my 10 MHz GPS derived
standard. That is better than specification even without the awaited
firmware correction feature, but there again it's not being measured
over more than a couple of weeks and is operated at room temperature.
73 Dave, G4AON
K3/100 #80
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
