K3: TX-INH help please

[Edward R Cole]

My guess it you have not set the menu CONFIG: TX INH.  You have
choices of how you want it to work.  (see page 19 of the K3 manual).

I select HI=inh so that a 5v voltage will inhibit the K3
transmitter.  Bringing pin-7 on the ACC jack to ground enables the
transmitter to output RF.  One should use the fourth-stage of a
sequencer to control the inhibit ckt as I have indicated on my
website.  Your DCW-2004 is capable of doing this with the proper connection.

Do not try to control anything with pin-7 if you plan to use
inhibit.  Transverters and amps should be controlled from the
DCW-2004 (stage three), instead.

73, Ed - KL7UW

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html