K3 "TX INH" message after KPA3 install

[eurom6]

I just finished my K3 kit, worked great before KPA3 installation.  I now get "TX INH" when I try to "XMIT" or "TUNE".  No QRO or QRP output anymore.  I did something wrong but I'll be darned if I can figure it out.  Uninstalled and reinstalled KPA3, turned off and on, recalibrated.  Any thoughts.  tnx,  John N0GBR

[eurom6]

eurom6 wrote

I just finished my K3 kit, worked great before KPA3 installation.  I now get "TX INH" when I try to "XMIT" or "TUNE".  No QRO or QRP output anymore.  I did something wrong but I'll be darned if I can figure it out.  Uninstalled and reinstalled KPA3, turned off and on, recalibrated.  Any thoughts.  tnx,  John N0GBR

[eurom6]

Sorry guys I figured it out!!

eurom6 wrote

eurom6 wrote

I just finished my K3 kit, worked great before KPA3 installation.  I now get "TX INH" when I try to "XMIT" or "TUNE".  No QRO or QRP output anymore.  I did something wrong but I'll be darned if I can figure it out.  Uninstalled and reinstalled KPA3, turned off and on, recalibrated.  Any thoughts.  tnx,  John N0GBR

[eurom6]

For those who might have the same experience, the "TX INH" (transmit inhibit function) shows up only when the "TEST MD" mode is selected.  I guess I thought all menu items would show up just the "TEST MD" ones would not be editable.  (tnx Gary KI4GGX for your recommendation) 73 John  
 

eurom6 wrote

I just finished my K3 kit, worked great before KPA3 installation.  I now get "TX INH" when I try to "XMIT" or "TUNE".  No QRO or QRP output anymore.  I did something wrong but I'll be darned if I can figure it out.  Uninstalled and reinstalled KPA3, turned off and on, recalibrated.  Any thoughts.  tnx,  John N0GBR

[eurom6]

"TECH MD" no "TEST MD"

eurom6 wrote

For those who might have the same experience, the "TX INH" (transmit inhibit function) shows up only when the "TEST MD" mode is selected.  I guess I thought all menu items would show up just the "TEST MD" ones would not be editable.  (tnx Gary KI4GGX for your recommendation) 73 John  
 

eurom6 wrote

I just finished my K3 kit, worked great before KPA3 installation.  I now get "TX INH" when I try to "XMIT" or "TUNE".  No QRO or QRP output anymore.  I did something wrong but I'll be darned if I can figure it out.  Uninstalled and reinstalled KPA3, turned off and on, recalibrated.  Any thoughts.  tnx,  John N0GBR