K3 Text Decode Firmware Request

[Mike K2MK]

I have a P3 with SVGA board and there's sufficient room to display decoded text all of the time on the external monitor. I normally have decoding turned on when operating RTTY and CW even though I can view them with my PC software as well. What I don't need is the lower display of the K3 cluttered up with scrolling text decodes. With decodes flowing continuously it's cumbersome to make minor adjustments in power output, keyer speed, filter width, etc.. I would like to see a menu setting to permit blanking decodes on the K3 lower display but allowing them to flow to the P3/SVGA.

73,
Mike K2MK

[Jim Leder (Hotmail)]

I second that request. A reason I don't have a P3/SVGA card is what you have pointed out.


     Jim Bob Buckeye
            AKA
  **** Jim Leder****
    K8CXM since 1961
 IBM retiree since 1999
 
There are 10 types of people in this world -- those who understand binary
and those who don't.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html