The available tuning rates, for the K3, provide something for everyone. The problem I had was figuring out all of my options and how to get them. Maybe this will be of some help to others. Hopefully I didn't build any errors into here. :-)
There are four tuning rates (Hz per knob revolution) accessible by front panel buttons. LetÂ’s refer to them as R1-R4. The rates may be accessed by the following buttons and actions:
R1 Tap FINE for a display resolution of 0.001
R2 Tap FINE for a display resolution of 0.01 or RATE for 0.01
R3 Tap RATE for a display resolution of 0.1 or hold COARSE for 0.01
R4 Hold COARSE for a display resolution of 0.1
The CONFIG: VFO CRS, CTS, and FST menu settings determine the combination of rates for R1-R4 according to the following scheme:
R1 CTS in Hz
R2 10X CTS
R3 20X CTS when FST = 20
50X CTS when FST = 50
R4 50kHz when CRS = 0.5
100kHz when CRS = 1.0
I created a table for my own reference, but putting a table in an email usually doesn't work, so I will let you have the fun of creating your own.
72, Neal WA6OCP
K3/10/305
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
