[K3] Use of Tascam US-322 with Laptop

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

[K3] Use of Tascam US-322 with Laptop

KK5IB
I have a Tascam US-322 Audio Interface that works well with my K3 and desktop computer. I have tried to use it with my laptops for portable ops but they do not have enough power to run the interface. Is there a way to power the interface apart from the usual USB computer connection? I would also like to use the interface for some audio recording.
Thanks,
Darryl, KK5IB
Reply | Threaded
Open this post in threaded view
|

Re: [K3] Use of Tascam US-322 with Laptop

Jim Brown-10
On Mon,2/2/2015 3:58 PM, KK5IB wrote:
>   I have tried to use it with my laptops for portable ops but they
> do not have enough power to run the interface. Is there a way to power the
> interface apart from the usual USB computer connection?

Two suggestions. First, try a different port on the laptop. Sometimes
one port has more power available than another. Second, try a powered
USB hub. My Tascam US100 and Numark stereo IO both power quite nicely
from my T4x-series laptops.

73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: [K3] Use of Tascam US-322 with Laptop

KK5IB
Thanks for suggestions. Problem was that the software and drivers had to be installed before connecting the interface. Found that out by reading the manual. Works fine now.
Darryl, KK5IB
Reply | Threaded
Open this post in threaded view
|

Re: [K3] Use of Tascam US-322 with Laptop

Don Wilhelm-4
Yes, it always helps to read the manual!  Even for the coffeemaker -
they *used* to be so simple.

73,
Don W3FPR

On 2/2/2015 11:16 PM, KK5IB wrote:
> Thanks for suggestions. Problem was that the software and drivers had to be
> installed before connecting the interface. Found that out by reading the
> manual. Works fine now.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]