K3 Utility Restore config error

[gt-i]

Hello,
anybody encountered a problem restoring a previously saved
configuration? The error is "No response to write EEPROM block".
tnx 73 Gernot DF5RF

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[ke9uw]

I’ve gotten that. I just  saved again and that one was ok. Then I deleted the error one...but I don’t think the save with the error is necessarily bad.

Chuck Jack Hawley
KE9UW

Sent from my iPhone, cjack

> On Jun 19, 2020, at 6:38 PM, "[hidden email]" <[hidden email]> wrote:
>
> Hello,
> anybody encountered a problem restoring a previously saved
> configuration? The error is "No response to write EEPROM block".
> tnx 73 Gernot DF5RF
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[gt-i]

Thanks for the idea, unfortunately the problem persists. This makes me a
bit more nervous than before as I have done quite a bit of upgrading
lately (144MHz, Reflock, TCXO) and I had a fault in the tuner (capacitor
blown), and now the refclock is off by 220Hz.

Did anybody else had the problem before and knows the fix?

tnx for sharing

73 Gernot DF5RF



Am 20.06.2020 um 02:10 schrieb hawley, charles j jr:

> I’ve gotten that. I just  saved again and that one was ok. Then I deleted the error one...but I don’t think the save with the error is necessarily bad.
>
> Chuck Jack Hawley
> KE9UW
>
> Sent from my iPhone, cjack
>
>> On Jun 19, 2020, at 6:38 PM, "[hidden email]" <[hidden email]> wrote:
>>
>> Hello,
>> anybody encountered a problem restoring a previously saved
>> configuration? The error is "No response to write EEPROM block".
>> tnx 73 Gernot DF5RF
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]