Make sure that your computer is actually assigning COM10 to your virtual com
port. Many USB devices will not "install" until the device is actually
plugged in, and pick whatever com port it fastens on. This "walkabout" COM
port caused me trouble until I figured it out. I put something that called
it in my boot menu to nail it down. 73, Guy.
On Fri, Sep 17, 2010 at 11:01 PM, George Rebong <
[hidden email]> wrote:
> I can not get the K3 Utility to work with my two K3 radios. I can make
> update the firmware of one K3 using COM2 but I can not make my second K3
> using COM10 to work with the same K3 utility.
> On the K3 utility PORT tab, I closed COM2 and change to COM10. Then I click
> on the FIRWARE tab, it doesn't shows the FIRMWARE version currently
> installed on the radio. They are all blank or empty.
> --
> George Rebong
> KE6TE
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
