Gary,
What band are you on? With the original synth, actual 1-Hz step size will be slightly larger on the highest bands due to quantization at the DDS. I don't have exact figures but if you have an extremely accurate external counter, you could determine actual step size on each band.
The new synth provides much finer gradation -- typically 0.1 to 0.2 Hz -- on all bands. So a 1-Hz step will always be very close to 1 Hz.
73,
Wayne
N6KR
On Apr 21, 2015, at 3:04 AM, Gary Gregory <
[hidden email]> wrote:
> Ok folks, its official. I have lost the plot (play nice now)......
>
> VFO A is tuning in 2 hertz steps, not single.
>
> Reading the manual has not helped. Tried all the different settings in VFO
> CRS and VFO CTS etc....best i see is the 2 hertz steps when moving vfo A.
>
> FW is 4.86 and i use link so i have not updated the fw and still using
> original synth's.
>
> Must be gettin old i guess.
>
> Anyone know what my fat fingers have done?
>
> 73
>
> Gary
> Vk1ZZ
> K3, KPA500-FT, KAT500-FT
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
