K3 VFO LINK - UNLINK

[Deni F5VJC]

I have my K3 with dual receivers using latest firmware set to, CONFIG : VFO
LINK set to OFF.

However, I find when first switching ON the K3,  VFO A and B are linked.
The way out of this is to press SUB to engage Diversity and press Sub again
to release Diversity, then A and B are no longer linked.

I do not want Linked VFO/s.

Anyone else see this behaviour?


73,  Deni - F5VJC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Vic Rosenthal]

Are you using any rig-control or logging program? If so, see if it the problem happens when the K3 is turned on with the program not running.

Vic 4X6GP/K2VCO

> On 16 Oct 2015, at 7:48 AM, F5vjc <[hidden email]> wrote:
>
> I have my K3 with dual receivers using latest firmware set to, CONFIG : VFO
> LINK set to OFF.
>
> However, I find when first switching ON the K3,  VFO A and B are linked.
> The way out of this is to press SUB to engage Diversity and press Sub again
> to release Diversity, then A and B are no longer linked.
>
> I do not want Linked VFO/s.
>
> Anyone else see this behaviour?
>
>
> 73,  Deni - F5VJC
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]