K3: VOX pumping when notch is turned on

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

K3: VOX pumping when notch is turned on

Ed K1EP
I'll be submitting this the support line, but wanted to know if
anyone else has seen this.  In SSB mode, with the headphones on
(plugged in front panel), I turn on the auto-notch.  I get the VOX
tripping on and off but when it trips, RX audio starts coming out the
speaker as well as the headphones.  I have the VOX gain around 10 and
anti vox somewhat high, like maybe 50 I think.  Using Heil HC-4 element.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: K3: VOX pumping when notch is turned on

mark roz
ED,

Same thing when you engage NR.
NR issue is on the list.
Mark
--- Ed K1EP <[hidden email]> wrote:

> I'll be submitting this the support line, but wanted
> to know if
> anyone else has seen this.  In SSB mode, with the
> headphones on
> (plugged in front panel), I turn on the auto-notch.
> I get the VOX
> tripping on and off but when it trips, RX audio
> starts coming out the
> speaker as well as the headphones.  I have the VOX
> gain around 10 and
> anti vox somewhat high, like maybe 50 I think.
> Using Heil HC-4 element.
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page.
http://www.yahoo.com/r/hs

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

RE: K3: VOX pumping when notch is turned on

N2TK
In reply to this post by Ed K1EP
I first saw a similar problem earlier today when I turned on NR on SSB. To
remedy it I need to increase the NR setting to something like F(2-4)- (1-4).
example - F-1-3 exhibits this problem, but F-4-1 does not exhibit this
problem.  I wonder if this is a function of the just released firmware?

N2TK/NP2, Tony

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of Ed K1EP
Sent: Friday, February 22, 2008 2:20 PM
To: [hidden email]
Cc: [hidden email]
Subject: [Elecraft] K3: VOX pumping when notch is turned on

I'll be submitting this the support line, but wanted to know if
anyone else has seen this.  In SSB mode, with the headphones on
(plugged in front panel), I turn on the auto-notch.  I get the VOX
tripping on and off but when it trips, RX audio starts coming out the
speaker as well as the headphones.  I have the VOX gain around 10 and
anti vox somewhat high, like maybe 50 I think.  Using Heil HC-4 element.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
Reply | Threaded
Open this post in threaded view
|

Re: K3: VOX pumping when notch is turned on

M0XDF
In reply to this post by Ed K1EP
Please see
<http://www.zerobeat.net/mediawiki/index.php/Firmware_problems_known_to_Elec
raft%2C_on_the_list_to_be_fixed>

This is a known issue and Elecraft are waiting for Lyle to return from
holiday (hey, they deserve one) to fix it, hopefully won't be long.

73 de M0XDF / K3 #174


On 22/02/2008 19:19, "Ed K1EP" <[hidden email]> sent:

> I'll be submitting this the support line, but wanted to know if
> anyone else has seen this.  In SSB mode, with the headphones on
> (plugged in front panel), I turn on the auto-notch.  I get the VOX
> tripping on and off but when it trips, RX audio starts coming out the
> speaker as well as the headphones.  I have the VOX gain around 10 and
> anti vox somewhat high, like maybe 50 I think.  Using Heil HC-4 element.
--
There is no pillow so soft as a clear conscience. -French proverb


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com