K3-Very low sensitivity and tx gain calibration failure

[OE5CSP-Chris]

Got some very good hints but the sensitivity on all bands is still far too low and I still can´t calibrate the tx gain.(low power)
Maybe there is a problem with the ATU, because when I hit the Ant button the K3 says NO ATU (ATU set to AUTO)and I can´t change the antenna terminal...

73 Chris-OE5CSP

[Brett Howard]

I had this problem too but usually what it is is simply the fact that
you didn't power cycle the radio after setting the ATU to bypass for the
first time in the config menu.

On Sat, 2008-06-28 at 11:46 -0700, OE5CSP-Chris wrote:
> Got some very good hints but the sensitivity on all bands is still far too
> low and I still can´t calibrate the tx gain.(low power)
> Maybe there is a problem with the ATU, because when I hit the Ant button the
> K3 says NO ATU (ATU set to AUTO)and I can´t change the antenna terminal...
>
> 73 Chris-OE5CSP

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com