K3 Voltage/Current display

[Dave, G4AON]

Turn on the "Tech mode" in the menu, then the other items will be displayed.

73 Dave, G4AON
K3/100 #80
===============
Under "User Interface" p7 of the OP manual, item 5 states that the
Utility displays voltage; Current; FP temp and HS temp; along with other
data.
In the Config. menu I found the FP and HS temps but this menu does not
display a voltage and current entry, not to mention "Other Data".
I suspect I'm looking in the wrong place, but after 90 minutes of
perusing the manual I am declaring "No Joy". So my question for today is:
How/Where in h...does one go about locating the Utility display for
voltage and current?
Sorry to bother you with this as the answer is no doubt staring me in
the face. I just don't see it.

TFYT
BillHarris
K3/322
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[KXBill]

Tnx dave...
Will do that...however,  my CONFIG menu, starting on p50, includes tech mode  entries and voltage and current are not listed.  FP & HS temps (Utility Displays) are listed under CONFIG.  One would think (here's where I get into trouble) that the other items listed as Utility Displays would also be under CONFIG. unless otherwise stated.

TFYT
BillHarris w7kxb

> Date: Tue, 4 Mar 2008 21:07:18 +0000
> From: [hidden email]
> To: [hidden email]
> Subject: [Elecraft] K3 Voltage/Current display
>
> Turn on the "Tech mode" in the menu, then the other items will be displayed.
>
> 73 Dave, G4AON
> K3/100 #80
> ===============

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Vic K2VCO]

Bill Harris wrote:
> Tnx dave... Will do that...however,  my CONFIG menu, starting on p50,
> includes tech mode  entries and voltage and current are not listed.
> FP & HS temps (Utility Displays) are listed under CONFIG.  One would
> think (here's where I get into trouble) that the other items listed
> as Utility Displays would also be under CONFIG. unless otherwise
> stated.

This is not in the menu, it's an alternate VFO B display. Tap DISP. Then
you can scroll through these things with the VFO B knob.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com