|
I was on 40 meter CW Saturday afternoon operating the Indiana QSO Party
mildly, using a low 40 meter dipole and an amp. This K3 is new to me serial #8600 range and was on the K1N expedition. My other (2nd) K3 is in #4600 range. Two times I experienced a broad noise from 7024 to 7033 tuning above or below this range and the noise disappeared (I did this several times to confirm). It sounded like a SSB station splattering. I had a P3 on and saw it also. The 2nd time it happened I had my other K3 on and swapped frequencies and radios and the noise was not on the 2nd K3, swapping back and it was on the 1st one again. This was the first time I have experienced this but I have only had the new K3 in line for about a week. I used the radio maybe 4 times in the last week and did not notice any problem. I used the radio the rest of the day and did not notice this behavior again. Any thoughts? Thanks, Mike W9RE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
Interesting Mike. I have just recently gotten K3 s/n 8895 and I have noticed
this 'band noise' in about the same 7024 to 7033 area. At first I thought it was someone trying to tune up on SSB, but the noise was solid for a little over five minutes and then it disappeared. I basically dismissed it because I never heard such with my six year old K3 plus I just would not suspect the K3 would internally produce such! I have heard this K3 'noise' maybe three times in the month that I've had this one. Anybody else (especially with the new synthesizer installed) heard this? 73, Tom - W4BQF -----Original Message----- From: Elecraft [mailto:[hidden email]] On Behalf Of Mike Wetzel Sent: Sunday, May 3, 2015 10:27 PM To: [hidden email] Subject: [Elecraft] K3 Weird Intermittent Problem I was on 40 meter CW Saturday afternoon operating the Indiana QSO Party mildly, using a low 40 meter dipole and an amp. This K3 is new to me serial #8600 range and was on the K1N expedition. My other (2nd) K3 is in #4600 range. Two times I experienced a broad noise from 7024 to 7033 tuning above or below this range and the noise disappeared (I did this several times to confirm). It sounded like a SSB station splattering. I had a P3 on and saw it also. The 2nd time it happened I had my other K3 on and swapped frequencies and radios and the noise was not on the 2nd K3, swapping back and it was on the 1st one again. This was the first time I have experienced this but I have only had the new K3 in line for about a week. I used the radio maybe 4 times in the last week and did not notice any problem. I used the radio the rest of the day and did not notice this behavior again. Any thoughts? Thanks, Mike W9RE ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
In reply to this post by W9RE
<quote author="Mike Wetzel">
My other (2nd) K3 is in #4600 range. Any thoughts? Do you have KSYN3As installed in this unit? 73, Bill W4ZV |
|
In reply to this post by W9RE
My K3, s/n 202 with all mods including the new synth boards,
is presenting no noise as has been described in the several emails on this subject. Of course there is a lot of indescribable noise in the upper part of the band that I don't understand, but I think that is my problem and not the radio.:-) 73, Ken K3IU ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ On 5/4/2015 7:36 AM, Chester Alderman wrote: > Interesting Mike. I have just recently gotten K3 s/n 8895 and I have noticed > this 'band noise' in about the same 7024 to 7033 area. At first I thought it > was someone trying to tune up on SSB, but the noise was solid for a little > over five minutes and then it disappeared. I basically dismissed it because > I never heard such with my six year old K3 plus I just would not suspect the > K3 would internally produce such! I have heard this K3 'noise' maybe three > times in the month that I've had this one. > > Anybody else (especially with the new synthesizer installed) heard this? > > 73, > Tom - W4BQF > > > -----Original Message----- > From: Elecraft [mailto:[hidden email]] On Behalf Of Mike > Wetzel > Sent: Sunday, May 3, 2015 10:27 PM > To: [hidden email] > Subject: [Elecraft] K3 Weird Intermittent Problem > > I was on 40 meter CW Saturday afternoon operating the Indiana QSO Party > mildly, using a low 40 meter dipole and an amp. This K3 is new to me serial > #8600 range and was on the K1N expedition. My other (2nd) K3 is in #4600 > range. Two times I experienced a broad noise from 7024 to 7033 tuning above > or below this range and the noise disappeared (I did this several times to > confirm). It sounded like a SSB station splattering. I had a P3 on and saw > it also. The 2nd time it happened I had my other K3 on and swapped > frequencies and radios and the noise was not on the 2nd K3, swapping back > and it was on the 1st one again. This was the first time I have experienced > this but I have only had the new K3 in line for about a week. I used the > radio maybe 4 times in the last week and did not notice any problem. I used > the radio the rest of the day and did not notice this behavior again. > > > > Any thoughts? > > > > Thanks, > > > > Mike W9RE > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to [hidden email] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
|
ser# 2244 2 new synths
cannot find any solid carriers/ birdies in that 40 mtr region .... other than long tuneups, which go away with antenna switch,, cu all at dayton bill ny9h/ 3 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] |
| Free forum by Nabble | Edit this page |
