Remember these are roofing filters not the normal bandwidth filters we are
used to. The DSP is going to provide the final filtering. All the roofing
filter does is reduce the width of the front end.
Therefore, you might not need all of them or any of them depending on the
type of operating you do. The casual operator may not need any additional
roofing filters. The supplied 2.7 khz is already pretty narrow for a roofing
filter (compared to the 15khz in the Pro3).
In my Orion, which has a very similar roofing filter design to the K3, I
have a 1.8khz roofing filter for SSB work and a 600hz filter for CW. Those two
are all I need. The skirts are wide enough that the signal does not sound
pinched, yet it does greatly improve the ability to operate near strong
signals. It would be redundant and unnecessary to have any more filters than
these two.
The interesting question (to me) is the difference between the 8 pole and 5
pole filters, where they go and what difference it will make. I suspect
we'll have to wait for people to play with the radios to get a good grip on the
implications.
k4ia
Craig "Buck"
Fredericksburg, Virginia USA
------------------------------------------------------------------------------
--
Get a sneak peek of the all-new AOL.com.
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com