K3 and CAT software

[Kjeld Holm]

Dear all,

I am using K3 with HamRadio de Luxe. Mostly I am quite satisfied. But I have
a few  issues which I would like to hear if anybody should have any
solutions to.

I miss a slider for high cut and one for low cut. Can I add this myself (and
if so how?). Any other CAT software that will do the job?

Using HRD to shift from eg. 20 meter data-R to 40 meter (and selecting
data-R) AND once again selecting 20 meter I am returned to 20 meter LSB (not
data-R). Any solutions?

I am also using DXLab. Clicking on a spot with split on SpotCollector my K3
goes to the split frequency not to the DX's frequency. Any solutions?

InDXLab the Commander seems very rudimentary and I have not figured out any
way to add controls that will get it to any degree near the facilities of
HRD. Have I missed something obvious?

Vy 73 de
OZ1CCM "Kel"

Kjeld Holm


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[k5oai]

On 2/23/2014 7:32 AM, Kjeld Holm wrote:
> I am also using DXLab. Clicking on a spot with split on SpotCollector my K3
> goes to the split frequency not to the DX's frequency. Any solutions?
>
Spot Collector/Config/General
make sure the box for Set Xcvr split is checked


> In DXLab the Commander seems very rudimentary and I have not figured out any
> way to add controls that will get it to any degree near the facilities of
> HRD. Have I missed something obvious?
 >
Out of the box, DXLabs Commander isn't as glitzy and pretty as HRD,
but it is *HIGHLY* configurable and capable of almost everything you
would want it to do, however it does require you to work for it, lol.

here is are some views of what can be done:
https://picasaweb.google.com/k5oai.sam/DXLabs#5963652888989334018

here are 2 links that will help you configure commander for ur K3:
http://www.dxlabsuite.com/dxlabwiki/TranceiverControlElecraft
http://www.dxlabsuite.com/commander/Help/CommandSequences.htm

also if you join the DXLabs yahoo group:
https://groups.yahoo.com/neo/groups/dxlab/info

in the files section under:
Command Sequences and Sliders user-defined Command Sequences and Sliders
for Commander

https://groups.yahoo.com/neo/groups/dxlab/files/Command%20Sequences%20and%20Sliders/

you will find an Elecraft section with many of the sequences & sliders
already written up for you.

enjoy


--
GB & 73
K5OAI
Sam Morgan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html